Work Instructions: Replacing Bump Stops
Parts Needed:
- Bump Stop (P-M1014) https://shop.tommycarwash.com/P-M1014
Tools Needed:
- Channel Locks
Procedure:
- Place the desired wrap assists in “Manual” on Tommy Controller and push the wrap out. This will help give you access to remove the bump stop.
- Twist off the rubber bump stop. You should be able to use just your hands. If not use a medium to large-sized pair of channel locks to twist off.
- Twist on the new rubber bump stop.
- Turn the wrap assists back to “Auto” on the Tommy Controller.
- Push wraps all the way out and release. Watch to make sure the bump stop engages correctly.
Instructional Video: