How to setup the desktop Star Micronics printer and Cash Drawer 1. Connect RJ 12 labeled PRINTER and connect this to the RJ 12 port on the Star Micronics printer.
2. Connect the 3 pin DC 24v power Adaptor into the DC 24V on the Printer. 3. Connect opposite RJ 12 end labeled Cash Drawer into the RJ 12 port on the Cash drawer.
4. Power On Star Micronics printer.
5. On the back of the Star Micronics printer press and hold the red PAIR button for 7 seconds until small LED light is flashing.
RJ 12 cable
5.
LED
Updated: 4/19/19 – Camden Guzman (616) 795-4892 EXT:2265
6. On Tommy POS iPad go to settings, Bluetooth, available devices, and select the Star Micronics printer that is requesting to pair. 7. Device should appear on paired devices to test to see if working properly, punch in a quality wash with cash, this should print out a receipt as well as opening the cash drawer.